Simple DIY office desk plan for beginners
Posted on March 3, 2021
We came up with an idea of creating easy DIY office desk crafts with Scandinavia style when we accidently met a beautiful office desk at a furniture store. However, it costs thousands of dollars, so we decided to build one for ourselves. The Crafty Pioneer will show you the process we make our simple wood DIY office desk and recommend you 10 handmade office desk ideas from other designers and blogger. From farmhouse DIY office desk, DIY office storage desk to modern DIY office desk, you will find your favorite right away!
How to make simple DIY office desk step by step
Our desk or table will have some hidden cable management system and a dry-erase surface on the desktop. Since the desk is sizeable (30-in x 60-in), we wanted the legs to be movable, so we can move it to another room, or transport it if demanded. I used actual, not nominal dimensions, and costs are rounded off to the nearest dollar. Along with a DIY bookselve, office desk is also an important item in your DIY Office Decor.
Step 1: Measuring and preparing
- 3/4-in. primed hardwood plywood, 4×8-ft.
- Common square 1.5-in. x 1.5-in. x 36-in. (6 pcs)
- 5/16-in. x 2.5-in. normal hex bolts
- 0.75-in x 3.5-in. x 8-ft. primed pine board
- 3-in. corner brackets (8 pcs.), flat L brackets & mending plates
- Assorted screws
- 5/16-in. x 1-in. threaded inserts for hex seals
- 1.5-in. x 48-in. Bright Nickel Continuous Hinge
- 0.75-in. pin
- Adhesive Veneer edging
- 27 oz. white gloss Dry remove kit
- 1 qt. clear wood stain
The Tabletop of the woodworking DIY office desk material can be substituted with a cheaper board finished by a darkened wood stain or an MDF topped off by a primed, but thinner board.
Cutting the pieces is straightforward. For the legs, we cut to an edge 6 degrees off-center for stability. We had the 4×8 pre-cut to my handmade office desk sides, and we used a miter saw to cut the excess of the pieces.
Step 2: Drilling and Attaching the Fasteners for the DIY office desk construction
Since we decided that this modern DIY office desk crafts can be taken apart & transported, we chose regular hex bolts as my main fasteners that pass through the wood material into a threaded insert for our simple DIY office desk equipment.
We used two fasteners; a 5/16-in. standard hex bolt plus a 1/4-in. round head bolt. We used a diameter guide to mark the correct position of the holes. We then started with a pilot hole which is 2 sizes smaller than my bolt. If the board needs to be assigned to another, we clamped both together before drilling through the second one. We put a drop of machine oil on the bolt, then used a pressure driver to drive it. Then we drove a threaded nut to the next board. Earlier, we stopped drilling half an inch less than the nut’s expansion, so it can embed itself the rest of the way.
Step 3: Assembling the pieces
We purposely allow the bolt heads to show since they lend a nice industrial counterpoint to this softwood texture. We combined the corner brackets, attached by a 1/4-in. x 1/2-in metal screw. The shallower depth makes sure that when we drive that screw all the way, it doesn’t create a bump on the desktop cover on the other side.
When faced with alignment issues with the bolts, we drove them a few turns at a time slowly until the joint ended up. The cross-brace for the legs was placed higher to make room for the metal cabinet that will partly span under the desk. We placed this mid-beam support further back to correspond to the placement of the main part, an iMac desktop computer.
Step 4: Adding the Back Compartment to the home DIY office desk design
The back section will house the power strip, desktop backup drive, and hide the cables. We could have used the extra primed board for the flooring, but we managed particleboard instead since it is hidden from view anyway.
The back section was put together by mending plates & flat L brackets. We used flat screws and put glue in the holes where they go for added connection. We used a bright nickel continuous hinge for the door of the handmade office desk and pierced some inch-sized holes in the middle instead of a drawer pull. We combined an opening for ventilation and improvised a cover out of a gutter petal screen.
Step 5: Painting the Dry-erase Area of the Desktop
We sanded that entire desktop surface, scored the border with an awl (so the pain points will be clean-looking), and blue taped it. We applied 3 coats, waiting 30 minutes to the labeled drying time to be sure. Looking at the label, the Rust-Oleum Specialty White Gloss Dry Erase Kit is best for a single application. We let it dry overnight, scored the border again, before peeling off that tape.
Step 6: Working the top of DIY office desk building process
We added a shoe base molding upon the underside of the desktop to blunt the edges. Drilling the grommet space, we started with 2 small holes to insert the jigsaw. We smoothed irregular edges with a Dremel. We used an adhesive veneer edging to hide that plywood cross-section. There will be 4 dowels standing on the dry-erase area. People serve as a divider or a slot to place phones sideways for loading.
Step 7: Finishing the easy DIY office table
We added the power strip and hid the wire by running it through insulated pipe clamps.
Step 8: Finished Project and Produce in Use
We hope you enjoyed our Instructable as much as we liked making this project.
Top 10 DIY office desk ideas
Now we move to 10 creative DIY office ideas that you can create with your own hands.
Wood DIY office desk furniture
Leave one live edge on this floating desk for a more natural aesthetic. Mount on the wall with two simple supports.
DIY Standing Desk
For those that vow by the health benefits of standing desks, this simple design wraps around this room without taking up too much space. Pair it with bar stools to those times when your feet need a break.
Farmhouse DIY office desk plan
The head of this rustic piece opens up to reveal three compartments. Stowaway fences and paper for the office—or make it vanity and enclose makeup also a mirror.
Handcrafted Butcher Block Desk
This DIY desk plan couldn’t be more simplistic—or sleeker! Attach hairpin legs to a butcher block slab for a mid-century modern-looking piece of furniture that looks straight out of a catalog.
Concrete DIY Desk Plan
A concrete top adds an industrial element to this sawhorse-style desk at The Merrythought for The Home Depot.
Rustic X DIY office desk crafts
We found that perfect desk for your farmhouse. The cute country-inspired design (courtesy of Michael including Sara of Huckleberry Ridge Furniture) includes two shelves and X details.
L-Shaped do-it-yourself office desk design
You’ll have plenty of space to spread out your materials thanks to this L-shaped desktop. The building plans by Jolene of this Rustic Barn do surprisingly simple for such a stunner.
Diy piping office table
Not only is choosing a practical way to build desk legs, but it also gives the design a very “in” industrial style.
Corner DIY office Desk construction
Reclaim a corner that will otherwise go unused by installing a custom workspace. A cove molding base gives the furniture look professionally built.
DIY Floating Desk Plan
A floating office desk up floor space in this boy’s room. You don’t even need to reduce storage: The hinged top swings open, so he can hide all his wealth inside.
We love looking at modern furniture, especially Scandinavian-inspired wooden pieces with white rhythms. For this project, we also wanted to discourage confusion, so there will be no drawers, but incorporate extended functionality that is requiring from most work desks in the market.
We hope that our simple DIY office desk plan inspire you to create your own furniture. Don’t forget to keep following DIY Office Decor for more home design ideas!
I am Amelia Baker – a single mom and blogger.
I used to work as a nurse in Michigan for 7 years. After I realize my passion for crafting, I decided to quit my job and move to my hometown with my family. Now I am working as a blogger, a craftsman and the most importantly, a full-time mother.