5 Causes & Solutions for Damaged Walls

Damaged Walls

Do you have damaged walls? Forget about wall treatment; wall paneling is the best and the most cost-effective way to live up your walls and give them a decorative touch. No paint, wallpaper, or anything else can renew your walls the way wall panels India do. 

Installing wall panels can help you conceal construction flaws. However, when your brick masonry walls get damaged, the chances are high that a bigger problem is hiding behind it, which you cannot ignore. This is what the historical buildings in cultural melting pots such as Washington DC have the advantage of. In case you might be wondering, historical buildings in Washington DC have a unique structure and architecture that some homeowners take inspiration from as well.

Factors like dampness, faulty construction, and bad workmanship are some of the major causes of wall damage that need to be treated immediately; otherwise, if left untreated can lead to an unfortunate incident. This article will further help you recognize such damages and tell you about the solutions you have at hand. Read on!

#1 Damage: Damp patches on the wall

Damp patches on the wall are due to the presence of excess moisture in your walls. There can be many causes of moisture ingress in your walls, for example, defective roof leakage, splashing rainwater, or water drainage from leaking kitchen or bath pipes. 


The first and foremost thing you need to do is identify the source of dampness. If there’s a leaky pipe, you need to get it repaired immediately. Or, if the water leakage is from kitchen or bathroom pipes, consider re-creasing the tile joints. Further, remove the damp patches from your walls by removing the loose plaster and consider re-plastering the walls.  

#2 Damage: Cracks on the walls

The common causes of wall cracking are poor foundation practices, the frequent movement of heavy vehicles nearby, which causes vibration, reactive soils, impatience during plasterwork, excavation and construction work in your proximity, or degradation of building materials.


Don’t panic if you have found a hairline crack on your walls! The solution to cracked walls is pretty easy; you just need to get the surface repaired and re-plastered with gypsum plaster or cement. After this, give your walls a finishing touch with a coat of primer. 

#3 Damage: Cracks around wooden doors and windows frame

Seeing cracks around the wooden frames of doors and windows is very common. This is because the wood tends to swell during the monsoon season and shrink during summers. The periodic expansion and contraction of timber exert pressure on the walls, thus resulting in wall cracks around the door and window frames.


It is advisable to use only seasoned wood to install windows and doors frames, or it would be better to consider using uPVC or aluminum frames. Wooden frames should be fixed and aligned correctly with the brickwork.

#4 Damage: Efflorescence

When the moisture penetrates the bricks of your walls, it dissolves the mineral salts in the cement and then seeps out in the form of a white powdery deposit of crystalline salts. The appearance of this white powdery substance on your brickwork is called Efflorescence. 


You can sponge the walls with water or scrape the deposits with a broom or a soft brush. Alternatively, wet-sponge the affected surfaces of the wall with a mild solution of white vinegar and water. 

#5 Damage: Cracking, flaking, and clumping

Insufficient surface preparation is the main culprit behind the cracking or flaking of walls. Conversely, when the paint is applied with a heavy hand, it dries with a clumpy and swollen look causing it to split. Or, if an adequate dry time is not allowed between the coats, it may lead to these problems. 


Peeling and repairing is the only solution for cracking, flaking, and clumping. Or, if you want to save yourself from all the mess created during peeling and repair, installing decorative wall panels in India is a great alternative. 

Believe it or not, wall paneling is the most common and widely preferred method by most homeowners to hide exposed wiring and conceal such construction flaws. Wall panels are made of highly durable materials which are easy to maintain, easy to install, and cost-effective. Plus, these can be installed on the ceiling to conceal seepage stains. Look for trusted wall solution providers near you, and seek their help to achieve best results. 

Leave a Reply

Your email address will not be published.